Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of the Smart 450?

Model: Smart Smart 450 - Years 1998-2007
Part: Tail light

To remove the rear light of the Smart 450, open the boot and loosen the two bolts located between the seal and the three rear lights. This will allow you to loosen the plastic that surrounds the three lights and slide it out of its housing, disconnecting the connectors attached to the rear. Once the connectors are disconnected, you can slide out the lights and replace them with new spare parts. The new light unit must be secured in its housing by tightening the appropriate bolts.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Third Brake Light on a Smart Fortwo
How to Remove the Third Brake Light on a Smart Fortwo
Smart (1998-2007 / 450) Follow this guide to remove the third brake light on a Smart Fortwo. To remove the central light, unscrew the screws located above it. Once the light…
How to Remove the Engine from the Smart 450?
How to Remove the Engine from the Smart 450?
Smart (1998-2007 / 450) To remove the engine from the Smart 450, open the rear hatch of the car to access the screws that secure the rear bumper. The bumper must be removed,…
Replacing the Rear Bulb on a Smart
Replacing the Rear Bulb on a Smart
Smart (1998-2007 / 450) In this video tutorial, learn how to replace a bulb in the rear light if one has blown on a Smart 450. To begin, open the upper and lower parts of th…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos