Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the tachometer and clock in the Smart

Model: Smart Smart 450 - Years 1998-2007
Part: Clock

In today's video we see how to install the speedometer and the clock in the first series of the Smart Fortwo. In fact, these accessories are not standard on the German car but are optional. Fortunately, the wiring is already included, so the operation is very simple to perform. You can buy the piece online, in the main spare parts ists. Once this is done we can proceed. We remove the upper plastic of the central dashboard, precisely in the installation area. We connect the connector and check for correct operation. Let's reassemble, if everything is ok, and finish the job.

Posted on 25 November 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you install the tachometer on the Smart car?
How do you install the tachometer on the Smart car?
Smart (2007-2015 / 451) In order to install the tachometer on the Smart car, you need to pry off the cover on the upper part of the central dashboard panel using an object. …
How to install a tachometer on a Smart 453
How to install a tachometer on a Smart 453
Smart (2014-2022 / 453) If you like to install a tachometer on your Smart 453 automatic, this system is very simple indeed. In the meantime, you can find this rev counter on…
How do you install the engine tachometer in the Smart 453?
How do you install the engine tachometer in the Smart 453?
Smart (2014-2022 / 453) Great video, clear in highlighting the steps to be taken to carry out the work and equally clear in the verbal description. The area of interest is t…

Other guides you may be interested in

How to Remove the Engine Oil Filter of the Peugeot 308

How do you remove the engine oil filter of the Peugeot 308? Follow this guide to proceed with the replacement. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket wrench, unscrew the large securing bolt of the container cap where the oil filter is located (engine compartment under the ventilation pipe). Drain the used oil from under the engine sump. Remove the worn oil filter and position a new one, ensuring it adheres well around the walls of the housing. Finally, refit the ventilation pipe and top up the engine oil. Close the front bonnet last.

Watch the video!


by ScegliAuto

More videos