Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on the Smart Fortwo 2014

Model: Smart Smart 451 - Years 2007-2015
Part: Service warning light

Resetting the engine oil light on your 2014 Smart Fortwo is something you should do every time you change the oil. Fortunately it is very simple and can be completed in seconds. You just need to follow the instructions described here. First, make sure you have turned off the car completely. Then insert the key, turn it to position one and start the instrument panel. At the same time, hold down the button located on the left side of the instrument panel for about 4 seconds and release it as soon as the warning light stops flashing. At this point the restore is completed and you can turn off the ignition.

Posted on 16 January 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Smart Fortwo service light
How to reset the Smart Fortwo service light
Smart (2007-2015 / 451) Let's find out in this short and simple guide how to reset the oil change maintenance service light of the Smart Fortwo, thus resetting the warning l…
How to reset the service light on the Smart Fortwo 453
How to reset the service light on the Smart Fortwo 453
Smart (2014-2022 / 453) Let's find out in this video tutorial how to reset the oil change routine maintenance service light on a Smart Fortwo 453, third series. First of all…
How to reset the Smart Fortwo service light
How to reset the Smart Fortwo service light
Smart (2007-2015 / 451) Below we will see instructions on how to reset the service light of the routine maintenance of the engine oil change of the Smart Fortwo. First of al…

Other guides you may be interested in

How to Remove the Spark Plugs on an Opel Astra

Want to remove the spark plugs on an Opel Astra? Here's how to proceed: pull the engine bay release lever and lift the front bonnet, securing it. Remove the plastic cover on the soundproofing panel covering the engine (if present), then remove the pins on the coil bar using a screwdriver. Disconnect the coils by hand after unplugging the power connector, then use your socket to unscrew the spark plugs and pull them out of the cylinder head. Take the new spark plugs and guide them into the engine head with the socket extension, tighten them and reconnect the respective power connectors. Finally, close the engine bay.

Watch the video!


by ScegliAuto

More videos