Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the central tunnel of the Smart Forfour

Model: Smart Smart 453 - Years 2014-2022
Part: Center console tunnel

Today we will see the main steps that will allow us to disassemble and replace the central tunnel of the Smart Forfour, but also of the Fortwo. First of all, we get on board the car and begin to remove the rear part of the central tunnel, by unscrewing the screw that we find inside; then we disconnect the electrical connector that we find below, as shown in the video. At this point remove all the plastic from the central tunnel, disconnecting the other electrical connectors; if necessary, also remove the cover of the central instrumentation, following the video tutorial until the end!

Posted on 28 January 2023 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the 2015 Smart Forfour?
Where is the fuse box located in the 2015 Smart Forfour?
Smart (2014-2022 / 453) To locate the fuse box of your 2015 Smart Forfour independently, you just need to follow these simple steps. First of all, you need to reach the driv…
How to replace the remote control battery of the Smart Forfour
How to replace the remote control battery of the Smart Forfour
Smart (2004-2006 / 454, Fourfour1) In this video we see how to remove the key of the Smart Fortwo and Forfour to replace the power battery, now exhausted. We begin the operation by equ…
Replacement of the air vents on the Smart Forfour
Replacement of the air vents on the Smart Forfour
Smart (2004-2006 / 454, Fourfour1) In this short video we will see how to remove and replace the air vents of the Smart Forfour, but also of the Fortwo. First of all, let's get on boar…

Removing the Timing Belt on a Suzuki Vitara

In this video, see the removal and replacement of the timing belt and water pump on a Suzuki Vitara. Open the bonnet and lift it, securing it in place. Use a socket wrench to remove the cooling radiator along with the associated hoses. Disconnect the power wiring using pliers, and remove the plastic undertray with a screwdriver. Use a spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket wrench to unscrew the tensioner pulley bolt, and remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket wrench. Finally, reinstall the radiator with the securing bolts.

Watch the video!


by ScegliAuto

More videos