Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light and bulbs on your Smart Roadster

Model: Smart Smart Roadster, 452 - Years 2003-2005
Part: Tail light bulb

We will see below the main steps which will allow us to disassemble and replace the rear light and its bulbs on your Smart Roadster. First of all, let's move to the rear of the car and start opening the tailgate; then unscrew the screws that we find on the sides, gently releasing the light from the bodywork to remove it, as shown in the video. At this point, remove the bulb holders from the ceiling light, thus replacing any faulty bulbs with new ones (having the same socket); then we reassemble the taillight again!

Posted on 22 February 2023 by ScegliAuto

Video tutorial

Related tutorials

How to remove the Smart Roadster rear bumper
How to remove the Smart Roadster rear bumper
Smart (1998-2007 / 450) Do we want to remove the bumper of the Smart? Let's see how the bumper of the Smart Roadster is removed. We open the rear engine compartment and lift…
How do you adjust the clutch of the Smart Roadster?
How do you adjust the clutch of the Smart Roadster?
Smart (2003-2005 / Roadster, 452) To adjust the clutch of the Smart Roadster, you need to modify the settings of the control unit by connecting a diagnostic tool to the vehicle's OBD …
Where are the fuses located in the Smart Roadster?
Where are the fuses located in the Smart Roadster?
Smart (2003-2005 / Roadster, 452) The fuses of the Smart Roadster are contained within the appropriate fuse box installed inside the vehicle. The fuse box is located in the lower left…

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos