Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the autonomy of the Smart EQ located?

Model: Smart Smart 453 - Years 2014-2022
Part: Checks and maintenance

To determine the remaining autonomy of the Smart EQ, it is necessary to insert the ignition key into the appropriate slot and turn on the instrument panel: the remaining autonomy will be shown on the instrument panel itself, in the bottom right part of it. This will be indicated by showing the remaining kilometers that can be traveled before a new recharge is needed; to ensure that this autonomy prediction is respected, it is necessary to avoid high speeds, otherwise it will be lower than the one shown. To restore autonomy, the car must be recharged.

Posted on 2 April 2023 by ScegliAuto

This video is currently unavailable

Related tutorials

Where is the Smart's battery located?
Where is the Smart's battery located?
Smart (2007-2015 / 451) In Smart vehicles, the battery is located inside the cabin specifically under the passenger side footwell. To replace the battery, we need to move th…
Where is the cabin air filter of the Smart Four Four located?
Where is the cabin air filter of the Smart Four Four located?
Smart (2004-2006 / 454, Fourfour1) The cabin air filter on a Smart Four Four model 451 vehicle is located inside the cabin. Specifically, the filter is located under the passenger side…
Where is the fuse box located in the Smart 450?
Where is the fuse box located in the Smart 450?
Smart (1998-2007 / 450) In this video we will see where the fuse box is located in the first series of the Smart Fortwo, code 450. Conventionally in cars, the fuse box is lo…

    Frequently Asked Questions

    • Smart 1998-2007 - What is the problem with the Smart 450's steering angle sensor? Read answer

How to Replace the Gear Gaiter on the Opel Meriva

Want to replace the gear gaiter on the Opel Meriva? Let’s see how to do it in this video: detach the gaiter frame from the plastic covering on the centre console (cut the plastic tie with side cutters). Once the gaiter to be replaced is removed, install the new piece. Reassemble: attach the gaiter to the plastic frame, then insert the cover onto the gear stick (secure the tie as shown in the video). Lower the gaiter until it clicks into place in the plastics of the centre console. Test the correct fitting of the previously installed parts.

Watch the video!


by ScegliAuto

More videos