Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Maintenance interval reset on Smart Fortwo.

Model: Smart Smart 451 - Years 2007-2015
Part: Instrument cluster

Every time we go to replace the engine oil and filter on our car, we must then proceed to update and reset the service light that is on in the instrument panel. To perform this operation, we will find all the instructions in the procedure described below, and we can also refer to the images in the video. After accessing the cabin, locate the button on the left-hand side of the instrument panel and press and hold it, then immediately turn on the panel. Wait a few seconds until the service indication begins to flash, and then disappears.

Posted on 30 May 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset maintenance on a Smart Fortwo
How to reset maintenance on a Smart Fortwo
Smart (2014-2022 / 453) In this very short tutorial today, we will see how to reset the maintenance interval on a Smart Fortwo, model 453 produced from 2014 to 2022. So let'…
How to reset the service light on the Smart ForTwo?
How to reset the service light on the Smart ForTwo?
Smart (2014-2022 / 453) Resetting the service on the Smart ForTwo is an extremely simple and quick operation, let's see how to proceed in this tutorial. Before doing so, mak…
How to reset the service light on the Smart ForTwo?
How to reset the service light on the Smart ForTwo?
Smart (2007-2015 / 451) In this tutorial we can see how to reset the service in the Smart ForTwo, an extremely simple and fast operation, to be carried out only once all sch…

Other guides you may be interested in

How to Replace the Timing Belt on a Chevrolet Matiz

How to replace the timing belt on a Chevrolet Matiz. Open the bonnet and secure it, lift the car on a column lift (if necessary, remove the front wheel using a screwdriver to take off the right wheel arch liner). Use a fixed spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket spanner to undo the securing bolt of the tensioner pulley, then remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket spanner. Finally, refit the rivets along with the wheel arch liner and reattach the wheel with the tyre to the vehicle.

Watch the video!


by ScegliAuto

More videos