Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front headlight bulb of the Smart 451?

Model: Smart Smart 451 - Years 2007-2015
Part: Headlight bulb

The replacement of the front headlight bulb of the Smart 451 is done by lifting the hooks located on the sides of the grille: once these hooks have been lifted, it will be possible to detach the front hood, in order to access the interior part of the headlight. Here you will find the connector connected to the corresponding bulb, which will need to be removed in order to disconnect it and replace it with a new one. Once the new bulb has been connected, it should be inserted into the corresponding headlight, ensuring that everything functions correctly.

Posted on 19 September 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the headlight bulb on the Smart 451?
How do you replace the headlight bulb on the Smart 451?
Smart (2007-2015 / 451) In order to replace the headlight bulb of the Smart 451, you need to open the front hood, so that you can access the rear part of the headlight. Here…
How do you replace the front headlight bulb of the Smart 451?
How do you replace the front headlight bulb of the Smart 451?
Smart (2007-2015 / 451) The light bulb of the front headlight of the Smart 451 can be replaced by loosening the clips located on the sides of the front grille of the car: by…
How do you replace the front headlight bulb in the Smart Fortwo 451?
How do you replace the front headlight bulb in the Smart Fortwo 451?
Smart (2007-2015 / 451) Replacing a headlight bulb on the Smart Fortwo 451 does not necessarily require going to a workshop, as it only takes a few minutes for the job to be…

Other guides you may be interested in

How to Replace the Rear Wheel Bearing on Peugeot 407

How to remove a rear wheel bearing along with all associated parts on a Peugeot 407? Position your car on a column lift, loosen the bolts with a socket wrench and raise it to a comfortable height. Unscrew the bolts and remove the wheel, then start unscrewing the bolts of the brake caliper to detach it from the bracket. Use a socket to loosen the caliper bolt. Now remove the caliper bracket and unscrew the bolts on the brake disc, pulling the disc towards you to slide it off the wheel hub. Completely remove the wheel hub from the car's arm and extract the worn bearing. Using a pressing tool, fit the new bearing. Before reassembling everything, clean all dirt and debris from the disassembled parts with brushes and lubricate the components. Refit the brake disc with all associated bolts.

Watch the video!


by ScegliAuto

More videos