Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Smart
  4. :
  5. Smart
  6. : How to check and replace the coolant in the Smart Fortwo.

Smart - Video tutorial

Model: Smart Smart 453 - Years 2014-2022
Part: Antifreeze liquid
Operation: How to check and replace the coolant in the Smart Fortwo.

Let's see the instructions that will allow us to check and replace the engine coolant of the Smart Fortwo. First of all, let's move to the engine compartment and start by checking the level of the engine coolant, which can be seen on the marks of the reservoir. If it is below the maximum level or on the minimum level, we will top up or replace the coolant. To replace the coolant, it will be necessary to drain and refill it, by disconnecting the radiator hose and unscrewing the filler cap, following the video tutorial until the end!


Posted on 22 September 2023 by ScegliAuto



Replacement of the coolant in the Smart Fortwo.
Smart (2007-2015 / 451) Today's step-by-step instructions will show us how to replace the coolant in the Smart Fortwo. First, we lift the car and start unscrewing the coolan
Replacing the coolant on Smart Fortwo
Smart (2007-2015 / 451) We replace the coolant of a Smart Fortwo. Let's see how it replaces. We open the plastic levers placed on the sides of the front grille with our hand
Guide to replace the thermostat of the Smart Fortwo 800 Diesel
Smart (1998-2007 / 450) In this video we will see how to remove and replace the coolant temperature thermostat of the Smart Fortwo 800 Diesel. First, let's move to the rear

    Frequently Asked Questions

    • Smart 1998-2007 - Where is the Smart radiator fluid found? Read Answer
    • Smart 1998-2007 - Where is the coolant expansion tank of a Smart ForTwo located? Read Answer
    • Smart 1998-2007 - Where to put the coolant on the Smart 451? Read Answer
    • Smart 2007-2015 - Where is the Smart radiator fluid reservoir located? Read Answer
    • Smart 1998-2007 - Where is the coolant of the Smart put? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos