Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting tire pressure on a Smart ForFour.

Model: Smart Smart 453 - Years 2014-2022
Part:

In this very short video tutorial today, we will see how to reset the tire pressure on a 2015 Smart Forfour. Let's start the operation by turning on the vehicle's instrument panel. Then, using the controls on the left side of the steering wheel, we open the menu on the speedometer's information display. Next, we select "change settings" and then "tire pressure monitoring" using the "OK" button. Finally, we confirm to set the new tire pressure and complete the job.

Posted on 5 December 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Smart Forfour
How to reset the service light on the Smart Forfour
Smart (2014-2022 / 453) These short and simple instructions will allow us to reset the maintenance reminder (service) on the Smart Forfour, as well as on the Fortwo. First o…
How to reset the "Tire Pressure" light on a Smart ForFour
How to reset the "Tire Pressure" light on a Smart ForFour
Smart (2007-2015 / 451) Using the portable compressor supplied with our Smart ForFour, we begin by checking and eventually inflating the tires, so as to reach the pressure r…
Where is the fuse box located in the 2015 Smart Forfour?
Where is the fuse box located in the 2015 Smart Forfour?
Smart (2014-2022 / 453) To locate the fuse box of your 2015 Smart Forfour independently, you just need to follow these simple steps. First of all, you need to reach the driv…

Other guides you may be interested in

Removing the Timing Belt on a Suzuki Vitara

In this video, see the removal and replacement of the timing belt and water pump on a Suzuki Vitara. Open the bonnet and lift it, securing it in place. Use a socket wrench to remove the cooling radiator along with the associated hoses. Disconnect the power wiring using pliers, and remove the plastic undertray with a screwdriver. Use a spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket wrench to unscrew the tensioner pulley bolt, and remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket wrench. Finally, reinstall the radiator with the securing bolts.

Watch the video!


by ScegliAuto

More videos