Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the license plate lights of the Smart Fortwo

Model: Smart Smart 453 - Years 2014-2022
Part: License plate light

Below we will see the instructions that will allow us to disassemble and replace the license plate lights of the Smart Fortwo. First of all, let's move to the back and start removing the license plate light fixture, levering on the sides with a small flat screwdriver to detach it; then disconnect the electrical connector found on the back, as shown in the video. At this point, we replace the old bulb inside the fixture with the new one; then we reassemble the light fixture and connect it, applying the reverse procedure!

Posted on 20 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the license plate on the Smart Fortwo 451
Smart (2007-2015 / 451) In this video we will see how to remove the license plate and the license plate holder on the Smart Fortwo 451; this procedure can be applied to all …
Replacing a Headlight Bulb on a Smart Fortwo
Replacing a Headlight Bulb on a Smart Fortwo
Smart (2007-2015 / 451) Let's see how to proceed with replacing a headlight bulb on a Smart Fortwo. First, unscrew the securing screws located on the top grille of the headl…
How to remove the headlight bulb of a Smart ForTwo?
How to remove the headlight bulb of a Smart ForTwo?
Smart (2004-2006 / Fourfour1, 454) Let's start by removing the front top cover of our Smart ForTwo, using the ignition key, and then removing the plastic underneath. After that, we wil…

How to Remove the Center Console on a Mercedes C-Class

Let's see how to remove the center console on a Mercedes C-Class. Use a plastic trim tool to pry off the cover located at the bottom of the center console. Remove the leather shift boot along with its plastic frame. After removing the cover, unscrew the fastening screws located at the top of the center console with a screwdriver. Once this is done, pull the console away and disconnect the power cables for the knob. Finally, insert the new piece into the center console area and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos