Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Smart Fortwo key

Model: Smart Smart 450 - Years 1998-2007
Part: Key

We insert a screwdriver with a metal tip into the top part of the key and then open the key of the Smart Fortwo, a model produced from 1998 to 2007, into two parts. After opening the key, we proceed with the battery replacement and insert a CR2032 in place of the worn-out battery. We close the remote control and as a final test of the replacement, we go near the vehicle to test the key's functioning by opening and closing the vehicle. If the key does not work, it may be necessary to reprogram the key itself by getting into the vehicle and turning the ignition on and off multiple times with the doors closed and locked.

Posted on 4 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the key battery of a Smart Fortwo
How to replace the key battery of a Smart Fortwo
Smart (2007-2015 / 451) How to replace the key battery of a Smart Fortwo? Let's see in this video how to best perform the replacement: take our ignition key and go with the …
Smart Fortwo 451 key battery replacement
Smart Fortwo 451 key battery replacement
Smart (2007-2015 / 451) Today we will see how to open the key remote control and how to replace the internal battery of a Smart Fortwo 451; the operation is very simple and …
Replace the battery of a Smart Fortwo
Replace the battery of a Smart Fortwo
Smart (2007-2015 / 451) Replacing the battery of a Smart Fortwo? Let's see the disassembly of the battery. We open the car door (passenger side) and remove the carpet coveri…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos