Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Exterior Mirror on Ssangyong Rexton

Model: SsangYong Rexton MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Side mirror

See other generations:
Video tutorial

As with many other car models, replacing the mirror on the Ssangyong Rexton is straightforward. For protection, you may start by placing masking tape around the mirror.

As mentioned, removing the glass is very simple: just lever at the back with a plastic wedge or a flat screwdriver, so that the rear clips detach and the mirror comes out of its housing. At this point, you only need to disconnect the connector.

Proceed in reverse for refitting, applying pressure with your hands to ensure it fits securely.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

Guide to Adjusting the Timing Chain of the Ssangyong Rexton
Guide to Adjusting the Timing Chain of the Ssangyong Rexton
SsangYong Rexton (2001-2017 / MK 1) Today, we will explore the main steps for adjusting the timing chain of the Ssangyong Rexton, following the instructions provided below. To access th…
Replacing the Diesel Filter on SsangYong Rexton 2.2 Diesel
Replacing the Diesel Filter on SsangYong Rexton 2.2 Diesel
SsangYong Rexton (2001-2017 / MK 1) In this video tutorial, you will see the main steps to remove and replace the diesel filter on a SsangYong Rexton 2.2 Diesel. First, open and lift th…
How to reset the tyre pressure light on the Ssangyong Rexton?
How to reset the tyre pressure light on the Ssangyong Rexton?
SsangYong Rexton (2017-2026 / MK 2) To clear the tyre pressure light on the Ssangyong Rexton, inflate the tyres to the optimal pressure value, which is indicated on the sticker affixed …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos