Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on a Ssangyong Tivoli - KG Mobility Tivoli

Model: SsangYong Tivoli MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tail light

Video tutorial

Today's guide will show you how to remove and replace the rear light or its bulbs on a Ssangyong Tivoli, as well as on a KG Mobility Tivoli. First, move to the rear of the vehicle and open the boot lid; then unscrew the fixing screws found on the side of the light, disconnecting the electrical connector of the bulbs to remove it, as shown in the video.

At this point, replace the stop bulbs if necessary, or replace the entire rear light; apply the reverse procedure for reassembly!


Updated on 9 August 2026 by ScegliAuto


Related tutorials

How to Remove the Centre Tunnel of a Ssangyong Tivoli - KG Mobility Tivoli
How to Remove the Centre Tunnel of a Ssangyong Tivoli - KG Mobility Tivoli
SsangYong Tivoli (2015-2023 / MK 1) .. tunnel of the Ssangyong Tivoli, as well as the KG Mobility Tivoli, in simple steps. First, get inside the cabin and start by removing the gear knob;.. …
How to disassemble the front door panel of the Ssangyong Tivoli
How to disassemble the front door panel of the Ssangyong Tivoli
SsangYong Tivoli (2015-2023 / MK 1) Below we will discover information on how to disassemble and remove the front door panel of the Ssangyong Tivoli. First, we open the front door and s…
Where Are the Fuses Located in the Ssangyong Tivoli?
Where Are the Fuses Located in the Ssangyong Tivoli?
SsangYong Tivoli (2015-2023 / MK 1) In the Ssangyong Tivoli, the fuses are located inside the designated fuse boxes installed in the vehicle: in this type of vehicle, you will find two …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos