Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the inner and outer panel of the rear hatch of the Subaru Outback.

Model: Subaru Outback BS, MK 5 - Years 2014-2019
Part: Door trim panel

Today we will see the instructions that will allow us to disassemble and replace the inner and outer panel of the rear trunk door of the Subaru Outback. First, let's open the trunk door and start unscrewing all the fastening screws located on the trim, removing the plastic side pillars first; then we disconnect the panel cable by prying at the sides to detach and remove it. At this point, we will also remove the outer panel of the trunk door, making the necessary repairs or replacements; finally, we will reassemble everything!

Posted on 24 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear headlight bulbs of the Subaru Outback
Replacement of the rear headlight bulbs of the Subaru Outback
Subaru Outback (2003-2009 / BL, BP, MK 3) Through this process, we will discover the steps that will allow us to disassemble and replace the rear headlight bulbs of the Subaru Outback. First …
How to Replace the External Handle on a Subaru Outback
How to Replace the External Handle on a Subaru Outback
Subaru Outback (2003-2009 / BL, BP, MK 3) To replace the external handle on a Subaru Outback, loosen the screws securing the corresponding door panel: these are located at the internal handle…
Removing the Rear Seat of the Subaru Outback
Removing the Rear Seat of the Subaru Outback
Subaru Outback (1999-2003 / MK 2, BH, BE) The instructions in this guide will allow you to remove the rear seat of the Subaru Outback in simple steps. First, open the rear doors of the vehicl…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos