Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Tailgate Panel on Subaru Outback

Model: Subaru Outback BL, BP, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Door trim panel

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the rear tailgate panel on a second-generation Subaru Outback. First, open the boot and remove the plastic cover at the top by prying it off; then remove the large panel by unscrewing the screws near the grab handle.

At this point, start prying at the sides of the panel to take it off, as shown in the video. Next, instructions will be provided on how to remove the door opening mechanism: if interested, follow the video to the end!


Updated on 11 April 2026 by ScegliAuto


Related tutorials

Disassembly of the inner and outer panel of the rear hatch of the Subaru Outback.
Disassembly of the inner and outer panel of the rear hatch of the Subaru Outback.
Subaru Outback (2014-2019 / BS, MK 5) Today we will see the instructions that will allow us to disassemble and replace the inner and outer panel of the rear trunk door of the Subaru Outba…
Removing the Rear Seat of the Subaru Outback
Removing the Rear Seat of the Subaru Outback
Subaru Outback (1999-2003 / BH, BE, MK 2) The instructions in this guide will allow you to remove the rear seat of the Subaru Outback in simple steps. First, open the rear doors of the vehicl…
How to Remove the Rear Bumper of the Subaru Outback
How to Remove the Rear Bumper of the Subaru Outback
Subaru Outback (2003-2009 / BL, BP, MK 3) To remove the rear bumper of the Subaru Outback, you must first detach the rear lights by loosening the corresponding screws, which are accessible on…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos