Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Indicators on a Subaru Forester

Model: Subaru Forester MK 5, SK - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tail light bulb

See other generations:
Video tutorial

Today, learn how to replace the direction indicators on a 2018 Subaru Forester. Start by following these steps.

Open the boot of the vehicle. Remove the screws from the headlamp cover.

Now take off the protective plastic. Next, remove the two additional screws located inside.

Disconnect the power connector to make the job easier. Then, extract the indicator bulb and replace it with a new one, either halogen or LED, depending on your preference.

Reinsert the new bulb into its designated socket. Refit the headlamp and screw the screws back in, following the steps previously taken.


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Subaru Forester
How to Reset the Service Light on a Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) Below is a quick guide that will allow you to quickly and correctly reset the service light on your Subaru Forester. First, insert the key and turn o…
How to Replace the Cabin Filter on a Subaru Forester 5
How to Replace the Cabin Filter on a Subaru Forester 5
Subaru Forester (2018-2025 / MK 5, SK) In this mini guide dedicated to your Subaru Forester fifth generation (2019-2023), we will discover how to correctly and independently replace the ca…
How to Install Logo Projector Puddle Lights on a Subaru Forester
How to Install Logo Projector Puddle Lights on a Subaru Forester
Subaru Forester (2012-2019 / MK 4, SJ) In this video, you will see a small Class E detail modification on the Subaru Forester, which generally applies to all Subaru models, ensuring that y…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos