Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Wiper Blade Replacement

Model: Subaru Impreza MK 4 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Windshield wipers

See other generations:
Video tutorial

Replacing the wiper blades is very simple and requires no tools; first, lift the wiper arm, rotate the blade ninety degrees, and push it backwards to detach it from the arm. Then, insert the new blade, aligning it with the arm's respective slot, and press it in until it clicks into place.

It is always better to replace the entire blade rather than just the rubber, choosing a quality product from well-known brands.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Differential Oil Replacement
Subaru Impreza (2011-2016 / MK 4) Periodic oil replacement is essential for maintaining mechanical efficiency. Lift the vehicle and secure it. Drain the differential oil by removing t…
Replacement of the Cabin Air Filter
Replacement of the Cabin Air Filter
Subaru Impreza (2011-2016 / MK 4) Changing the pollen filter in your car is very important as it protects against external agents that can enter the cabin. This filter should be repla…
Replacing Brake Discs and Pads
Replacing Brake Discs and Pads
Subaru Impreza (2001-2007 / MK 2) Has the brake wear warning light just come on? Don’t wait any longer, replace them! Let’s see how to do it together. Once the car is lifted on the si…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos