Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset Oil Change Service Light on Subaru Outback [UK]

Model: Subaru Outback BS, MK 5 - Years 2014-2019
Part: Warning light – error code

To turn off the orange light indicating the oil change service, open the fuse box located in the engine compartment on the upper right side. Inside the box, locate the alarm signal fuse. Using needle-nose pliers, remove the fuse and place it on the empty pin directly above. Next, return to the cabin, turn on the ignition and the engine, and check that the orange light has turned off. At that point, turn off the engine again and move the fuse back to its original correct pin, close the fuse box, and shut the bonnet.

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Service Light in a Subaru Outback?
How to Reset the Oil Service Light in a Subaru Outback?
Subaru Outback (2014-2019 / BS, MK 5) In the Subaru Outback, after changing the oil and filter, you need to manually remove the relevant warning light and reset the maintenance interval. …
How to Reset the Oil Light on the Subaru Outback
How to Reset the Oil Light on the Subaru Outback
Subaru Outback (2020-2025 / MK 6, BT) In this mini guide for all you owners of the new Subaru Outback, we will explain how to manually reset the engine oil light. First, turn on the instr…
…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos