Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light in a Subaru Outback?

Model: Subaru Outback BS, MK 5 - Years 2014-2019
Part: Warning light – error code

In the Subaru Outback, after changing the oil and filter, you need to manually remove the relevant warning light and reset the maintenance interval. In this video, you can see how to proceed. First, turn on the ignition and enter the maintenance section found in the settings menu. Once done, select the service you wish to reset and press the "delete" button. At this point, add a new service using the "add event" function and set the appropriate time and mileage interval for your condition.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Subaru Outback
How to Reset the Tyre Pressure Warning Light on a Subaru Outback
Subaru Outback (2009-2014 / MK 4, BM, BR) Before you begin, exit the cabin of your Subaru Outback. Start by checking and inflating the car's tyres until they all reach the correct pressure. N…
How do you reset the tire pressure light on the Subaru Outback?
How do you reset the tire pressure light on the Subaru Outback?
Subaru Outback (2014-2019 / BS, MK 5) To completely eliminate the tire pressure warning light that appears on the instrument panel of the Subaru Outback, first inflate the tires until the…
How to Reset the Tyre Pressure Warning Light on Subaru Outback
How to Reset the Tyre Pressure Warning Light on Subaru Outback
Subaru Outback (2014-2019 / BS, MK 5) Today's instructions will show you how to reset the tyre pressure warning light on the Subaru Outback, as well as the Forester. Before performing the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos