Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the maintenance reminder (service) of the Subaru Outback

Model: Subaru Outback MK 6, BT - Years 2020-2025
Part: Service warning light

This short guide will show us how to reset the maintenance reminder (service) of the Subaru Outback. First of all, we get into the car and start the instrument panel; then we go to the car settings on the central display, and then to the engine oil section, as shown in the video. At this point, we set the new distance to be traveled and the date, thus resetting the service reminder; we then verify that the service has been reset correctly (repeat the operation if not).

Posted on 4 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Subaru Outback
How to Reset the Tyre Pressure Warning Light on a Subaru Outback
Subaru Outback (2009-2014 / MK 4, BM, BR) Before you begin, exit the cabin of your Subaru Outback. Start by checking and inflating the car's tyres until they all reach the correct pressure. N…
Where is the OBD2 Port on the Subaru Outback 5?
Where is the OBD2 Port on the Subaru Outback 5?
Subaru Outback (2014-2019 / BS, MK 5) To access the data from the ECU of your Subaru Outback fifth series, you need to know the exact location of the OBD port to connect a diagnostic tool…
Resetting the TPMS on a Subaru Outback
Resetting the TPMS on a Subaru Outback
Subaru Outback (2014-2019 / BS, MK 5) Today, we will discover how to reset the tyre pressure warning light on a Subaru Outback; before performing the reset, ensure that all four tyres are…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos