Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Front Indicator LED Bulb

Model: Subaru Brz MK 1, ZN6.ZC6 - Years 2012-2023
Part: Side marker bulb

Generally, replacing the original bulbs with LED types will improve visibility as they have a significantly higher luminous capacity compared to halogen bulbs; the aesthetic appeal is also noteworthy: the vehicle will certainly appear more modern and attractive. To replace the front indicator bulb (WY21W fitting), which is integrated into the bumper, you must detach and move the inner wheel arch lining: turn the steering wheel to position it inside the wing, remove the push clips, and move the wheel arch liner to access the bulb holder. Detach it, remove the original bulb, and install the LED bulb, then reattach the bulb holder and reposition the wheel arch liner.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Indicator Bulb with LED
Replacing the Front Indicator Bulb with LED
Subaru Brz (2012-2023 / MK 1, ZN6.ZC6) To replace the front indicator bulb with an LED type, proceed as follows: the front indicator is integrated into the bumper, and to access the bulb h…
How to disassemble the front door panel of the Subaru BRZ
How to disassemble the front door panel of the Subaru BRZ
Subaru Brz (2012-2023 / MK 1, ZN6.ZC6) The following steps will show us how to disassemble and remove the front door panel of the Subaru BRZ. First, we open the front door of the car and s…
Replacing Front Discs and Pads
Replacing Front Discs and Pads
Subaru Brz (2012-2023 / MK 1, ZN6.ZC6) The video shows the removal of the brake pads and disc, performed in reality to replace the front hub bearing, although the details of that are not s…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos