Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the rear taillight bulbs of the Subaru Outback.

Model: Subaru Outback BT, MK 6 - Years 2020-2025
Part: Tail light bulb

Today's instructions will show us the process of disassembling and replacing the rear light bulbs of the Subaru Outback. First, we open the rear hatch and begin removing the plastic cover on the side of the taillight. Then, we unscrew the fastening screws located on the back, as shown in the video. At this point, we disconnect the electrical connector of the taillight in order to remove it. We then replace the rear light bulbs, reassemble it, and finally make the electrical connection.

Posted on 30 January 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear headlight bulbs of the Subaru Outback
Replacement of the rear headlight bulbs of the Subaru Outback
Subaru Outback (2003-2009 / BP, MK 3, BL) Through this process, we will discover the steps that will allow us to disassemble and replace the rear headlight bulbs of the Subaru Outback. First …
How to replace a Subaru Outback taillight
How to replace a Subaru Outback taillight
Subaru Outback (1999-2003 / BE, BH, MK 2) In this short and simple guide, let's see the instructions on how to disassemble and replace the rear light of the Subaru Outback, following the inst…
How to replace the rear light bulbs in the Subaru Outback?
How to replace the rear light bulbs in the Subaru Outback?
Subaru Outback (2009-2014 / MK 4, BM, BR) Replacing the rear light bulbs in the Subaru Outback is very simple, let's see how to proceed in this tutorial. First we open the tailgate and unscre…

How to Change the Glow Plugs on a Hyundai Santa Fe

In this video, see how to remove and replace the glow plugs on your Hyundai Santa Fe. Pull the lever to open the engine compartment located at the bottom left of the dashboard, lift the bonnet, and secure it. Follow the video for the tools to use for disassembly. Remove the plastic engine cover and the air filter kit; you will see the engine head bare without plastics. Unscrew the coils using a socket wrench and disconnect the power cables. Once all the coils are removed, unscrew the glow plugs from the head and take them out. To remove the other coils and glow plugs, you need to uncover the metal protection from the head; unscrew these as well and prepare to install the new glow plugs. Be careful not to let any debris fall into the engine head while unscrewing the glow plugs. It is advisable to vacuum the glow plug wells before disassembly.

Watch the video!


by ScegliAuto

More videos