Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear headlight bulbs of the Subaru Outback

Model: Subaru Outback BL, BP, MK 3 - Years 2003-2009
Part: Tail light bulb

Through this process, we will discover the steps that will allow us to disassemble and replace the rear headlight bulbs of the Subaru Outback. First of all, we open the rear hatch of the trunk and start unscrewing the fixing screws of the rear headlight, removing the plastic cover that we find on the side of it first; then we disconnect the electrical connector of the bulbs, as shown in the video. At this point, we remove the bulb holders with the bulbs, replacing any faulty lights; if necessary, we replace the entire taillight, finally reassembling everything!

Posted on 2 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Rear Light Bulbs on the Subaru Outback
Guide to Replacing the Rear Light Bulbs on the Subaru Outback
Subaru Outback (2020-2025 / MK 6, BT) Today's instructions will show you how to remove and replace the rear light bulbs on the Subaru Outback. First, open the tailgate and remove the plas…
Replacing Front Headlight Bulb on Subaru Outback
Replacing Front Headlight Bulb on Subaru Outback
Subaru Outback (2003-2009 / BL, BP, MK 3) Let’s see how to replace the blown bulbs in the front compartment of the Subaru Outback. Open the front bonnet by pulling the lever located in the ve…
How to Replace the Rear Light on a Subaru Outback
How to Replace the Rear Light on a Subaru Outback
Subaru Outback (1999-2003 / MK 2, BH, BE) This brief and simple guide provides instructions on how to remove and replace the rear light on a Subaru Outback, following the steps outlined below…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos