Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on a Subaru Outback

Model: Subaru Outback BH, BE, MK 2 - Years: 1999, 2000, 2001, 2002, 2003
Part: Tail light

See other generations:
Video tutorial

This brief and simple guide provides instructions on how to remove and replace the rear light on a Subaru Outback, following the steps outlined below. First, open the boot lid and start by removing the plastic cover located behind the light; then unscrew the fixing screws at the back, disconnecting the bulb connector to remove the entire light unit, as shown in the video.

Now, if necessary, replace the bulbs in the rear light, applying the reverse procedure for reassembly!


Updated on 16 July 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Rear Light Bulbs on the Subaru Outback
Guide to Replacing the Rear Light Bulbs on the Subaru Outback
Subaru Outback (2020-2025 / MK 6, BT) Today's instructions will show you how to remove and replace the rear light bulbs on the Subaru Outback. First, open the tailgate and remove the plas…
Replacing the rear light bulbs of the Subaru Outback
Replacing the rear light bulbs of the Subaru Outback
Subaru Outback (2003-2009 / BL, BP, MK 3) Through this procedure, you will discover the steps to disassemble and replace the rear light bulbs of the Subaru Outback. First, open the rear tailg…
…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos