Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the engine oil in the Suzuki GSXR 600, an extremely simple and quick operation, to be carried out every 12 months. First of all, we wait for the engine to be cold enough, then we remove the lower fairing and position a container underneath the motorcycle. We then locate the drain hole bolt, unscrew it using a socket wrench and let all the oil contained in the system drain out. At this point, all that's left to do is to unscrew the old filter, tighten both the replacement and the bolt, and pour in the new oil through the appropriate hole.

Posted on 7 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil in the Suzuki GSXR 600?
How to change the engine oil in the Suzuki GSXR 600?
Gsxr 600 Changing the engine oil in the Suzuki GSXR 600, as shown in this tutorial, is an extremely simple and quick operation. First, wait for the engine to …
How to Change the Engine Oil in a Suzuki GSXR 600?
How to Change the Engine Oil in a Suzuki GSXR 600?
Gsxr 600 As shown in this tutorial, changing the engine oil in a Suzuki GSXR 600 is a straightforward and quick task. First, ensure the engine is sufficiently…
How to change the engine oil in the Suzuki GSXR 600?
How to change the engine oil in the Suzuki GSXR 600?
Gsxr 600 In this tutorial, you will see how to change the engine oil in the Suzuki GSXR 600, a very simple and quick operation. First, wait until the engine i…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos