Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Brake Pads on a Suzuki Access 125?

Model: Suzuki Access 125
Part: Brake pads

Video tutorial

To remove the rear brake pads on your Suzuki Access 125, follow these steps. First, remove the rear wheel to access the brake caliper.

Once you reach the caliper, remove it and then extract the pads from their housing. Ensure you keep track of the position and orientation of the pads for correct reassembly.

Finally, install the new pads, reattach the brake caliper, and remount the rear wheel. Always pay attention during this process and ensure all bolts are tightened properly.


Updated on 4 November 2026 by ScegliAuto


Related tutorials

How to Replace Front Brake Pads on Suzuki Access 125?
How to Replace Front Brake Pads on Suzuki Access 125?
Access 125 You can replace the front brake pads on the Suzuki Access 125 by loosening the bolts that secure the brake caliper to its housing on the disc. Once t…
How do you disassemble the engine of the Suzuki Access 125?
How do you disassemble the engine of the Suzuki Access 125?
Access 125 To disassemble the engine of the Suzuki Access 125, you need to loosen the screws that secure the valve cover and the cylinder to the top of the engi…
How to Replace the Belt on the Suzuki Access 125?
How to Replace the Belt on the Suzuki Access 125?
Access 125 To replace the belt on the Suzuki Access 125, loosen the screws securing the transmission cover panel located on the left side near the rear wheel. O…

How to change the engine oil on the Aprilia Shiver 900?

To change the engine oil on the Aprilia Shiver 900, loosen the screws that secure the engine guard located at the bottom of the vehicle: once the screws are loosened, you can detach it and locate the drain plug of the oil sump. By removing this plug, you can collect all the used oil in a suitably placed container; at this point, allow all the oil to drain and remove the filter located at the bottom of the bike. Once the filter is replaced, top up the oil through the breather located on the right side of the bike.

Watch the video!


by ScegliAuto

More videos