Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the headlight bulb of the Suzuki GSX 1400, you need to loosen the screws that secure the headlight assembly to its housing: these screws will be all around the headlight assembly. Once the screws have been unscrewed, you can proceed by removing the headlight from its housing so that you can extract the bulb contained inside, after disconnecting the connector. At this point, you can insert the new bulb, making sure that everything works correctly and that all components are secure.

Posted on 17 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil of the Suzuki GSX 1400?
How to Replace the Engine Oil of the Suzuki GSX 1400?
Gsx 1400 To replace the engine oil of the Suzuki GSX 1400, loosen the drain plug of the oil tank, which can be completely removed to collect all the used oil …
How to Replace the Engine Oil and Oil Filter of the Suzuki GSX 1400
How to Replace the Engine Oil and Oil Filter of the Suzuki GSX 1400
Gsx 1400 It is necessary to regularly perform the routine maintenance service on the engine to ensure its longevity; let’s see how to replace the engine oil a…
How to Replace the Rear Brake Pads on a Suzuki GSX 1400
How to Replace the Rear Brake Pads on a Suzuki GSX 1400
Gsx 1400 Follow these step-by-step instructions to remove and replace the rear brake pads on a Suzuki GSX 1400. First, place your motorcycle on the centre sta…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos