Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the time on the instrument panel of the Suzuki Avenis 125

Model: Suzuki Avenis 125
Part: Clock

Video tutorial

These brief instructions will show us how to adjust the time on the display of the instrument panel of the Suzuki Avenis 125 scooter. First, we put the scooter on the center stand and start by pressing and holding for a few seconds the two buttons located on the left side of the panel, until the time display starts flashing; we then adjust the hour and then the minutes, using the same buttons, as shown in the video.

Finally, we exit the time setting to save the changes made, and then start the engine!


Posted on 14 July 2025 by ScegliAuto


Related tutorials

How to adjust the time on the Suzuki Avenis 125 scooter?
How to adjust the time on the Suzuki Avenis 125 scooter?
Avenis 125 In this tutorial we can see how to adjust the time on the Suzuki Avenis 125 scooter, an extremely simple and quick operation, to be carried out for e…
How to Set the Time on the Suzuki Avenis 125 Scooter?
How to Set the Time on the Suzuki Avenis 125 Scooter?
Avenis 125 In this tutorial, see how to set the time on the Suzuki Avenis 125 scooter, a very simple and quick operation, to be done for example after disconnec…
How to Change the Engine Oil on a Suzuki Avenis 125 Scooter?
How to Change the Engine Oil on a Suzuki Avenis 125 Scooter?
Avenis 125 In this tutorial, we will see how to change the engine oil on a Suzuki Avenis 125 scooter, a very simple and quick operation. First, ensure that the …

How to Replace the Air Filter on the Kawasaki Ninja 1000 SX?

In this tutorial, you will see how to replace the air filter on the Kawasaki Ninja 1000 SX, a very simple and quick operation. First, remove the seat, then take off both side panels by unscrewing the respective screws and unscrew the two bolts located at the front of the fuel tank. Next, lift the tank, support it with a rope if necessary, and remove the top cover of the airbox. At this point, extract the old filter, clean the inside of the housing from any dirt residue, and fit the new part by reversing the procedure.

Watch the video!


by ScegliAuto

More videos