Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Changing the motor oil of a Suzuki GSXR 600 requires attention to ensure the proper functioning of the engine. Start by placing the motorcycle on a stable stand, making sure it is level. Let the engine cool down if it has been recently used to avoid burns. Locate the oil drain plug under the engine and place a basin to collect the old oil. Carefully unscrew the plug using a suitable wrench and let the used oil drain completely. Once finished, securely screw the drain plug back on. Finally, add the new oil through the filling spout, respecting the quantity and type indicated in the user manual. Check the oil level to ensure it is correct before starting the engine.

Posted on 20 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil in the Suzuki GSXR 600?
How to change the engine oil in the Suzuki GSXR 600?
Gsxr 600 In this tutorial, you will see how to change the engine oil in the Suzuki GSXR 600, a very simple and quick operation. First, wait until the engine i…
How to replace the motor oil in the Suzuki GSXR 600?
How to replace the motor oil in the Suzuki GSXR 600?
Gsxr 600 In this tutorial we can see how to replace the engine oil in the Suzuki GSXR 600, an extremely simple and quick operation, to be carried out every 12…
How to change the engine oil in the Suzuki GSXR 600?
How to change the engine oil in the Suzuki GSXR 600?
Gsxr 600 In this tutorial, you will see how to change the engine oil in the Suzuki GSXR 600, a very simple and quick operation. First, ensure the engine is co…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos