Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
It will be possible to replace the rear brake pads of the Suzuki V-Strom 650 by loosening the screws that secure the brake caliper to its housing, at the top of the disc: once the caliper has been removed, the corresponding pin can be pulled out and the pads can also be extracted from their seat. At this point, it will be possible to position the new pads in the caliper, repositioning it on the disc: by securing it with the screws and inserting the pin that locks the pads, it can be verified that everything works correctly.

Posted on 20 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front brake pads on the Suzuki V-Strom 650?
How do you replace the front brake pads on the Suzuki V-Strom 650?
V Strom 650 .. to replace the front brake pads of the Suzuki V-Strom 650 by loosening the screws that secure the brake caliper to its housing on the disc. Once the.. …
How do you replace the brake pads on the Suzuki V-Strom 650?
How do you replace the brake pads on the Suzuki V-Strom 650?
V Strom 650 .. The brake pads on the Suzuki V-Strom 650 can be replaced by performing the same operation for both the front and rear brakes: you will.. …
How do you replace the levers of the Suzuki V-Strom 650?
How do you replace the levers of the Suzuki V-Strom 650?
V Strom 650 .. To replace the levers of the Suzuki V-Strom 650, you need to loosen the screws that secure them to their housing on the sides of the handlebars:.. …

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos