Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial, you will learn how to replace the transmission oil on a Suzuki Burgman 400. First, unscrew the oil drain plug located at the bottom of the left casing: use a 12 mm ratchet spanner for this. After that, allow all the oil to drain completely, and after removing the other casing, use a 14 mm spanner to unscrew the oil filler plug, which will be used to insert the new engine oil (usually a good 10w40 is used, but check the manual). Then, using a syringe, insert the new oil; when it starts to come out, it will indicate that it is full!

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Transmission Oil on a Suzuki Burgman 400
How to Change the Transmission Oil on a Suzuki Burgman 400
Burgman 400 To change the transmission oil on a Suzuki Burgman 400, you need to unscrew the screws securing the transmission cover, located near the rear wheel o…
How to reset the oil light on the Suzuki Burgman 400
How to reset the oil light on the Suzuki Burgman 400
Burgman 400 If you own a 2005 Suzuki Burgman 400 and want to learn how to manually reset the oil light, then all you have to do is pay attention to the following…
How to Replace the Transmission on a Suzuki Burgman 400?
How to Replace the Transmission on a Suzuki Burgman 400?
Burgman 400 To replace the transmission on the Suzuki Burgman 400, loosen the screws securing the cover on the left side of the bike, near the rear wheel. Once t…

How to Reset the Service Light on the Yamaha Xmax 250?

To reset the service light on the Yamaha Xmax 250, you need to insert the ignition key into the appropriate slot, so that you can turn it and switch on the instrument panel. Once this is done, press and hold the central button located on the left side of the instrument panel: the button should be held for about 20 seconds. When released, you will notice that the flashing service light has turned off: to verify that the reset has occurred correctly, you will need to switch off and then switch on the vehicle's instrument panel.

Watch the video!


by ScegliAuto

More videos