Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing Transmission Oil on Suzuki Burgman 400

Model: Suzuki Burgman 400
Part: Checks and maintenance

Video tutorial

Unscrew the three small screws that secure the plastic cover, as shown in the video. Then remove the adjacent leg shield.

At this point, you will have access to another cover, this time metal: it is the last protection separating you from the clutch. Once this protection is removed, you can unscrew the bolt that acts as a plug for the transmission oil drain hole, which you will collect in a container.

Approximately 180 ml will drain out, so prepare the same amount of 10W-40 oil to refill later, preferably using a large syringe. Tighten the drain hole and proceed to fill from the hole located above the clutch.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Change the Transmission Oil on a Suzuki Burgman 400
How to Change the Transmission Oil on a Suzuki Burgman 400
Burgman 400 To change the transmission oil on a Suzuki Burgman 400, you need to unscrew the screws securing the transmission cover, located near the rear wheel o…
How to replace the drive belt of the Suzuki Burgman 400
How to replace the drive belt of the Suzuki Burgman 400
Burgman 400 In this guide we will see the instructions that will allow us to disassemble and replace the transmission belt of the Suzuki Burgman 400 scooter. Fir…
How to Reset the Oil Light on the Suzuki Burgman 400
How to Reset the Oil Light on the Suzuki Burgman 400
Burgman 400 If you own a 2005 Suzuki Burgman 400 and want to learn how to manually reset the oil light, follow this guide and apply the steps described. First, e…

How to Replace the Clutch on the KTM XCF 450?

To replace the clutch on the KTM XCF 450, loosen the screws securing the corresponding cover located on the right side of the bike. Once the cover screws are loosened, you can remove it to access the underlying clutch. By unscrewing the corresponding bolts, you can extract all the discs that make up the clutch, allowing you to insert the new replacement parts. After inserting them, secure them with the corresponding screws and cover everything back up with the cover.

Watch the video!


by ScegliAuto

More videos