Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the engine oil and the corresponding filter in a Suzuki Burgman (the procedure is valid for different engine sizes), first, ensure that your bike is in a stable and safe position (for example, on a flat surface or on a ramp). This precaution is necessary to ensure the operator's safety. Next, unscrew the oil filler cap, place a container under the cap for draining, and unscrew the bolt that seals it. Once all the oil has drained (this operation should preferably be done with the engine warm for more fluid oil), unscrew the three small bolts that secure the filter housing cap, shown in the images (located directly under the oil filler). Extract the filter and, after cleaning its seat, replace it with a new one. That's it! Reassemble by reversing the operations seen.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Engine Oil and Oil Filter on the Suzuki Burgman
Replace the Engine Oil and Oil Filter on the Suzuki Burgman
Burgman 125 This video will briefly show you how to carry out routine maintenance by replacing the engine oil and the small oil filter on the Suzuki Burgman 125 …
How to Replace Oil and Engine Filter on a Suzuki Burgman 125
How to Replace Oil and Engine Filter on a Suzuki Burgman 125
Burgman 125 How to replace oil and engine filter on a Suzuki Burgman 125? Follow this guide. Position the scooter on its original stand, then use a socket to uns…
How to reset the oil change (service) indicator on the Suzuki Burgman 125
How to reset the oil change (service) indicator on the Suzuki Burgman 125
Burgman 125 These short and simple steps will show us how to reset the engine oil change (service) light on the Suzuki Burgman 125. First, put the scooter on the…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos