Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Burgman 400
Part:

In this short video, see how to remove the front mudguard on a Suzuki Burgman 400 scooter in simple and quick steps. First, position the central stand on the scooter and start by removing the nut found behind the mudguard using a 10 mm spanner; then unscrew the two side screws located on the outside of the mudguard using a Torx screwdriver. At this point, remove the brake hose by releasing the clip, and finally take off the front mudguard as shown in the video; apply the reverse procedure for reassembly!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front bulb on a Suzuki Burgman 400
How to replace the front bulb on a Suzuki Burgman 400
Burgman 400 Before starting, position your Suzuki Burgman 400 on the centre stand, then turn the front wheel to the right. Next, lean down near the front headlam…
How to reset the oil light on the Suzuki Burgman 400
How to reset the oil light on the Suzuki Burgman 400
Burgman 400 If you own a 2005 Suzuki Burgman 400 and want to learn how to manually reset the oil light, then all you have to do is pay attention to the following…
How to remove the front wheel of the Suzuki Burgman 400
How to remove the front wheel of the Suzuki Burgman 400
Burgman 400 In this brief and simple guide, you will learn how to remove and replace the front wheel or tyre of the Suzuki Burgman 400 scooter. First, place your…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos