Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the Fuse Box on the Suzuki Burgman 400

Model: Suzuki Burgman 400
Part: Fuse box

Video tutorial

In this video, discover the location of the fuse box on the Suzuki Burgman 400 scooter from 2007, following the instructions below. First, remove the plastic covers located under the instrument panel by prising them off at the sides; then, on the left side, you will find the small fuse box, as shown in the video.

At this point, remove the cover to access the fuses; use the owner's manual to see the fuse diagram and identify the one you need for replacement (if so, replace it with one of the same amperage)!


Updated on 12 May 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on the Suzuki Burgman 400
How to Reset the Oil Light on the Suzuki Burgman 400
Burgman 400 If you own a 2005 Suzuki Burgman 400 and want to learn how to manually reset the oil light, follow this guide and apply the steps described. First, e…
Where Are the Fuses on the Suzuki Burgman 400?
Where Are the Fuses on the Suzuki Burgman 400?
Burgman 400 The fuses for the Suzuki Burgman 400 are located inside the fuse box installed at the bottom of the front fairing. To access the box, you will need t…
How to replace the front bulb on a Suzuki Burgman 400
How to replace the front bulb on a Suzuki Burgman 400
Burgman 400 Before starting, position your Suzuki Burgman 400 on the centre stand, then turn the front wheel to the right. Next, lean down near the front headlam…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos