Do it yourself
Frequently asked questions about cars and motorcycles
The fuses for the Suzuki Burgman 400 are located inside the fuse box installed at the bottom of the front fairing. To access the box, you will need to unscrew the screws that secure the front fairing, located at the top of the handlebars. Once the screws are loosened and the fairing removed, you will have access to the fuses. Here you will find those responsible for the operation of the ABS, indicators, etc. You can replace them by removing them from their slots and installing a new piece of the same amperage.

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Burgman 400 In this video, discover the location of the fuse box on the Suzuki Burgman 400 scooter from 2007, following the instructions below. First, remove the…
Burgman 400 If you own a 2005 Suzuki Burgman 400 and want to learn how to manually reset the oil light, then all you have to do is pay attention to the following…
Burgman 400 Before starting, position your Suzuki Burgman 400 on the centre stand, then turn the front wheel to the right. Next, lean down near the front headlam…

How to Service the Beta RR 350

This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level!

Watch the video!


by ScegliAuto

More videos