Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today's tutorial, we will go through the steps to remove and replace the dashboard bulbs on the Suzuki Burgman 650, following the instructions below. First, remove the instrument panel by unscrewing all the fixing screws at the front; then disconnect the various electrical connectors. Next, unscrew the screws of the instrument panel to access the electronic board; remove the small bulbs and replace them with new ones (of the correct type). Finally, reassemble everything!

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on the Suzuki Burgman 650
How to Reset the Oil Light on the Suzuki Burgman 650
Burgman 650 If you have just performed an oil change on your Suzuki Burgman 650 and do not know how to manually reset the related warning light, then this guide …
How to Remove the Front Panel of the Suzuki Burgman 650
How to Remove the Front Panel of the Suzuki Burgman 650
Burgman 650 Today, you will learn how to remove the front panel of the Suzuki Burgman 650. To remove the panel, use an 8 mm star screwdriver to unscrew the screw…
How to reset the oil warning light on the Suzuki Burgman 650
How to reset the oil warning light on the Suzuki Burgman 650
Burgman 650 If you have just changed the oil on the Suzuki Burgman 650 and still notice the oil warning light is on, do not worry; simply perform the following r…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos