Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this guide for the Suzuki Burgman 400, you will learn how to correctly reset the engine oil light in a simple yet detailed manner. First, insert the key and turn on the ignition without starting the engine. Next, locate the "Set" and "Adj" buttons just below the rev counter. Press and hold the "Adj" button for a few seconds and release it as soon as the display starts to flash. At this point, press and hold the "Set" button and release it after a few seconds. Finally, press and hold "Adj" again until the display stops flashing. Turn off and then turn on the ignition to complete the reset.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the Suzuki Burgman 400
How to reset the oil light on the Suzuki Burgman 400
Burgman 400 If you own a 2005 Suzuki Burgman 400 and want to learn how to manually reset the oil light, then all you have to do is pay attention to the following…
How to replace the front bulb on a Suzuki Burgman 400
How to replace the front bulb on a Suzuki Burgman 400
Burgman 400 Before starting, position your Suzuki Burgman 400 on the centre stand, then turn the front wheel to the right. Next, lean down near the front headlam…
How to Reset the Service Light on the Suzuki Burgman 400
How to Reset the Service Light on the Suzuki Burgman 400
Burgman 400 In this mini guide, discover how to manually reset the service light on your Suzuki Burgman 400. First, insert the key and turn on the instrument pan…

How to Replace the Headlight Bulbs on the KTM RC 200?

As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat.

Watch the video!


by ScegliAuto

More videos