|
Do it yourself
| |||
| ||||
|
Model: Suzuki Burgman 400
To replace the belt on the Suzuki Burgman 400, loosen the screws that secure the cover near the rear wheel on the left side of the bike: once the cover is removed, you will have access to the underlying components. The central nut that secures the variator and the clutch can be loosened, allowing you to free the belt from its housing and replace it with a new one. After the replacement, reassemble the clutch and variator, then seal the cover with the screws.
Updated on 8 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Burgman 400
To replace the belt on the Suzuki Burgman 400, loosen the screws securing the cover near the rear wheel on the left side of the bike. Once the cover …
Burgman 400
If you own a 2005 Suzuki Burgman 400 and want to learn how to manually reset the oil light, then all you have to do is pay attention to the following…
Burgman 400
Today's steps will show you how to dismantle and replace the drive belt on the Suzuki Burgman 400 scooter. First, place the scooter on the centre sta…
|
How to Replace the Front Headlight on the BMW F800GS
In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
