Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front and Rear Brake Pads on a Suzuki Burgman 650

Model: Suzuki Burgman 650
Part: Brake pads

Video tutorial

Today, discover the necessary guide to remove and replace the front and rear brake pads on the Suzuki Burgman 650 scooter. First, place the scooter on the centre stand and start unscrewing the fixing bolts of the front brake caliper, removing it from the disc.

Apply pressure on the caliper piston to retract it, then remove and replace the brake pads as shown in the video. At this point, install the new original brake pads, applying the same procedure for replacing the rear brake pads!


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on the Suzuki Burgman 650
How to Reset the Oil Light on the Suzuki Burgman 650
Burgman 650 If you have just performed an oil change on your Suzuki Burgman 650 and do not know how to manually reset the related warning light, then this guide …
How to reset the oil warning light on the Suzuki Burgman 650
How to reset the oil warning light on the Suzuki Burgman 650
Burgman 650 If you have just changed the oil on the Suzuki Burgman 650 and still notice the oil warning light is on, do not worry; simply perform the following r…
How to Change the Dashboard Bulbs on a Suzuki Burgman 650
How to Change the Dashboard Bulbs on a Suzuki Burgman 650
Burgman 650 In today's tutorial, we will go through the steps to remove and replace the dashboard bulbs on the Suzuki Burgman 650, following the instructions bel…

Vespa Immobiliser: How to Transfer the Chip from the Old Key

In the case shown in the video, the new keys are not recognised by the ECU: the Vespa starts but does not run (thus the immobiliser is active). The solution shown in the video involves locating the immobiliser chip in the old key (the one recognised by the ECU). Open the cover on the key (only red master keys or some blue ones), remove the chip (which is a small black cylinder or rectangle), insert it into the new key in place of the new one, and try to start. Now the key will work. If the master key is red, it will definitely work. If it is blue, it might work: you need to cut the silicone; this is possible but a delicate operation. If it is a black clone key, then it is a system that does not work.

Watch the video!


by ScegliAuto

More videos