Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on a Suzuki GSX-S 1000

Model: Suzuki Gsx S 1000
Part: Brake pads

Video tutorial

The steps in this guide will show you how to disassemble and remove the rear brake pads on the Suzuki GSX-S 1000 motorcycle. First, place the motorcycle on a stand and begin unscrewing the bolts of the rear brake caliper to remove it from the disc; then apply pressure to the caliper piston to remove the old pads, cleaning the caliper of any residual dirt, as shown in the video.

At this point, install the new original brake pads, finally reassembling the brake caliper, following the video tutorial to the end!


Updated on 6 October 2026 by ScegliAuto


Related tutorials

Replace the Front Brake Pads of the Suzuki GSX-S 1000
Replace the Front Brake Pads of the Suzuki GSX-S 1000
Gsx S 1000 .. replace the front brake pads of the Suzuki GSX-S 1000, following the instructions below. First, remove the brake calipers from the disc; to do this,.. …
How to Replace the Front Brake Pads on a Suzuki GSX S 1000?
How to Replace the Front Brake Pads on a Suzuki GSX S 1000?
Gsx S 1000 .. To replace the front brake pads on a Suzuki GSX S 1000, use a socket spanner to detach the brake caliper from the disc. Once the caliper is removed from.. …
How to Replace the Front Brake Pads on a Suzuki GSX S 1000F?
How to Replace the Front Brake Pads on a Suzuki GSX S 1000F?
Gsx S 1000 .. replace the front brake pads on the Suzuki GSX S 1000F, loosen the screws that secure the brake caliper to the corresponding disc, allowing you to detach.. …

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos