Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Remote Battery of the Suzuki Vitara

Model: Suzuki Vitara JT - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Key

See other generations:
This video is currently unavailable

When the battery that powers the remote control for opening and closing the doors of the Suzuki Vitara runs out, you need to replace it. Hold the remote control and use a small flathead screwdriver to pry along the groove of the edge to separate the two halves.

Place the buttons, membrane, and circuit board into the front shell.

Remove the old battery from its housing in the rear shell and replace it with a new CR2032 battery, ensuring the negative terminal is facing upwards, then press the two halves back together until they click.


Updated on 26 October 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on a Suzuki Vitara?
How to Replace the Remote Battery on a Suzuki Vitara?
Suzuki Vitara (1988-1998 / MK 1, TA, ET) To replace the remote battery on the Suzuki Vitara, loosen the small screw located on the protrusion at the top of the remote. Once the screw is loos…
How to Replace the Key Fob Battery for the Suzuki Vitara
How to Replace the Key Fob Battery for the Suzuki Vitara
Suzuki Vitara (2015-2024 / LY) Today we will discover step-by-step instructions on how to disassemble and replace the battery of the key fob for the Suzuki Vitara. First, take the …
How to Replace the Remote Battery on a Suzuki Vitara
How to Replace the Remote Battery on a Suzuki Vitara
Suzuki Vitara (2005-2015 / JT) The steps to replace the remote battery on a Suzuki Vitara are simple and quick. Take the remote and use a flat-head screwdriver to pry open the edge…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos