Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the key remote for the Suzuki Celerio

Model: Suzuki Celerio MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
This video is currently unavailable

Below we discover the instructions that will allow us to disassemble and replace the battery of the remote control key for the Suzuki Celerio. First, we take our remote control and start levering on the side of the remote control to open it in two parts; then it will be possible to access the battery and the electronic board, as shown in the video.

At this point, we remove and replace the battery with the new one, of the correct type and with the same code; we insert it in the correct direction and then reassemble the two halves of the remote control; finally, we check the operation of the commands.


Posted on 27 December 2024 by ScegliAuto


Related tutorials

How to replace the remote battery of the Suzuki Celerio?
How to replace the remote battery of the Suzuki Celerio?
Suzuki Celerio (2014-2023 / MK 2) Replacing the remote battery of the Suzuki Celerio is an extremely simple and quick operation; let's see how to proceed in this tutorial. For this, y…
How to Replace the Key Battery in a Suzuki Celerio
How to Replace the Key Battery in a Suzuki Celerio
Suzuki Celerio (2014-2023 / MK 2) To correctly replace the button cell battery located inside the smart key of the Suzuki Celerio, you only need a few simple steps. Let's see how to d…
How to Replace the Key Battery in the Suzuki Celerio
Suzuki Celerio (2008-2014 / MK 1) Replacing the battery inside your Suzuki Celerio key (2008-2014) is a simple task that anyone can do by following the steps in this guide. First, obt…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos