Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Suzuki SX4?

Model: Suzuki Sx4 JY, MK 2 - Years 2013-2021
Part: Service warning light

To reset the "Service" light on a Suzuki SX4, turn on the instrument panel without starting the engine by turning the key in the ignition switch. Press and hold the button next to the instrument panel until the display starts flashing. At this point, release the button and press it again to confirm the reset. The light should turn off after a few seconds. Once the procedure is complete, turn off the instrument panel and turn it back on to verify that the reset was successful. If the light remains on, try repeating the process or consult the vehicle manual for further instructions.

Posted on 10 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service in the Suzuki SX4?
How to reset the service in the Suzuki SX4?
Suzuki Sx4 (2013-2021 / JY, MK 2) Resetting the service in the Suzuki SX4, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must have …
How to reset the tire pressure on Suzuki SX4
How to reset the tire pressure on Suzuki SX4
Suzuki Sx4 (2013-2021 / JY, MK 2) To reset the tire pressure on the Suzuki SX4, you can follow these general steps. Turn on the car: make sure all tires are inflated to the correct pr…
How to reset the "Service" light on a Suzuki SX4?
Suzuki Sx4 (2006-2014 / GY, MK 1, EY, RW) To reset the "Service" light on a Suzuki SX4, start by turning on the instrument panel without starting the engine. Look for the button under the ins…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos