Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob of the Manual Gearbox on the Suzuki Ignis

Model: Suzuki Ignis MK 2 - Years 2003-2008
Part: Shift knob

Today, we will discover the steps to remove and replace the gear knob of the manual gearbox on the Suzuki Ignis. First, get inside the cabin and start by detaching the gaiter from the knob, using a thin, pointed tool to lever it off the sides. Rotate and pull firmly upwards on the knob until it detaches from the lever, as shown in the video. Now, install the new knob onto the gear lever, securing it properly. Then, attach the gaiter to the gear knob, using a tie wrap if necessary.

Posted on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Knob on a Suzuki Ignis?
How to Replace the Gear Knob on a Suzuki Ignis?
Suzuki Ignis (2003-2008 / MK 2) To replace the retaining ring on the Suzuki Ignis, disconnect the retaining ring located halfway between the gear knob and the leather gaiter at its …
How to Set the Clock on the Suzuki Ignis
How to Set the Clock on the Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) Below are the instructions for changing the time on the display of the instrument cluster of the Suzuki Ignis. First, get in the vehicle and start th…
How to set the time on the display of the Suzuki Ignis instrument panel
How to set the time on the display of the Suzuki Ignis instrument panel
Suzuki Ignis (2016-2024 / MK 3) In this short guide, we will see the information related to changing the time on the display of the instrument panel of the Suzuki Ignis. First of al…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos