Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Wheel Bearing on Suzuki Ignis

Model: Suzuki Ignis MK 2 - Years 2003-2008
Part: Bearing

Removing a damaged wheel bearing? Here’s how to disassemble the parts to reach the wheel bearing. Lift the vehicle to your preferred height, loosen the bolts with a telescopic spanner. Unscrew the bolts and remove the wheel, then start unscrewing the bolts of the caliper bracket and detach it. Unscrew the bolts of the brake disc and detach it from the wheel hub, then, using pliers or a screwdriver, remove the central hub cap. Loosen the large bolt with a socket spanner and suitable socket, and remove the piece. Disassemble the wheel hub from the vehicle using the upper bolt and slide off the bearing. Fit the new bearing with all associated parts. Test the functioning of the components.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time on a Suzuki Ignis
How to Set the Time on a Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) Before starting, sit in the driver's seat of your Suzuki Ignis. Begin by activating the instrument panel by turning the ignition key in the lock, wit…
Removing the Radio on Suzuki Ignis
Removing the Radio on Suzuki Ignis
Suzuki Ignis (2003-2008 / MK 2) This tutorial shows you how to remove the radio from a Suzuki Ignis. First, get into the vehicle and grab a cross-head screwdriver: unscrew the two u…
How to Replace the Timing Belt on a Suzuki Ignis
How to Replace the Timing Belt on a Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) How to replace the timing belt on a Suzuki Ignis? Lift the car on a column lift (if necessary, remove the front wheel using a screwdriver to take off…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos