Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the front wheel bearing of the Suzuki Grand Vitara 2.4

Model: Suzuki Grand Vitara MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Bearing

See other generations:
Video tutorial

The following steps will illustrate the procedure for disassembling and replacing the front wheel bearing of the Suzuki Grand Vitara 2.4. First, lift the vehicle and start by removing the front wheel; then proceed to unscrew the bolts of the front brake caliper, removing it from the disc, as shown in the video.

At this point, remove the brake disc and proceed with the disassembly of the bearing, unscrewing it with a 32 mm socket wrench; extract the front half shaft to remove it and replace it with the new one, finally reassembling the wheel and the braking system.


Posted on 16 October 2025 by ScegliAuto


Related tutorials

…
Suzuki Grand Vitara (2005-2015 / MK 2) To replace the rear shock absorber of the Suzuki Grand Vitara, lift the car with a jack or ramp so that the corresponding wheel is not in contact wit…
Suzuki Grand Vitara (2005-2015 / MK 2) To replace the front brake pads on a Suzuki Grand Vitara, lift the vehicle with a jack or ramp so that the corresponding front wheel is off the groun…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos