Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the "Tire Pressure" Light on a Suzuki SX4

Model: Suzuki Sx4 MK 1, RW, EY, GY - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Warning light – error code

See other generations:
Video tutorial

The "Tire Pressure" light indicates that the pressure in one of the tyres is abnormal, so before performing this operation, ensure you have normalised the pressure. Start by activating the instrument panel of the car. Then, press and hold the button on the right side of the instrument cluster for a few seconds.

This will take you into the normal menu of the car. Next, repeatedly press this button until the error screen reappears. You will need to drive a few miles, and once you have done so, the light will automatically turn off.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to reset the "Service" light on a Suzuki SX4?
How to reset the "Service" light on a Suzuki SX4?
Suzuki Sx4 (2013-2021 / JY, MK 2) To reset the "Service" light on a Suzuki SX4, turn on the instrument panel without starting the engine by turning the key in the ignition switch. Pre…
How to reset the tire pressure on Suzuki SX4
How to reset the tire pressure on Suzuki SX4
Suzuki Sx4 (2013-2021 / JY, MK 2) To reset the tire pressure on the Suzuki SX4, you can follow these general steps. Turn on the car: make sure all tires are inflated to the correct pr…
How to Reset the Tyre Warning Light on a Suzuki SX4
How to Reset the Tyre Warning Light on a Suzuki SX4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) To reset the tyre warning light on the Suzuki SX4, first, get into the vehicle, close the doors, and turn on the instrument panel without starting th…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos