Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Doors on a Suzuki Samurai

Model: Suzuki Samurai JB, JA, Sj40, Sj30 - Years 1989-2003
Part: Car door

This video will show you how to remove the doors on a Suzuki Samurai, specifically how to unscrew the door hinge bolts, which can often be quite complicated. First, try applying a small amount of thread-locking adhesive (the type of glue useful for mechanical locking) on both the heads of the two screws and the tip of the drill: this should help you unscrew the screws. If this does not work, using an angle grinder, you will need to cut off the head of the screw, allowing you to unscrew it with a medium-sized screwdriver.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the timing belt of the Suzuki Samurai
Guide to replacing the timing belt of the Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) The following steps will show us how to disassemble and replace the timing belt of the Suzuki Samurai, following the instructions below. First, open …
Removing Fuel Tank from Suzuki Samurai
Removing Fuel Tank from Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) In today's video, learn how to remove the fuel tank from a Suzuki Samurai in simple steps. First, lift the car with jack stands and remove the breath…
Replacing the Wing Mirrors on a Suzuki Samurai
Replacing the Wing Mirrors on a Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) In this brief guide, we will see the instructions to remove and replace the external wing mirror on a Suzuki Samurai. First, open the front door and …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos